1. Skip to Menu
  2. Skip to Content
  3. Skip to Footer
  • Last Modified: Thursday 14 May 2015.
  • Satellite Settings
  • DSTV Receivers
  • ELSAT Receivers

Tune Into  ITVN on the Following Satellites

If you are watching from Africa or parts of Europe, please use the following settings for your Satellite Decoder/Receiver:

Intelsat 20 Ku Band (Europe & Africa Beam)

Frequency: 12722 MHz

Symbol Rate: 26657 MS/s

FEC: 1/2

Polarization: Vertical

If you are watching from Asia, Australia, Middle East or parts of Europe, please use the following settings on your Satellite Decoder/ Receiver:

Thaicom 5 C-Band Global Beam

Frequency: 3640

Symbol Rate: 28066

FEC: 3/4

Polarization: Horizontal

If you are watching from North America, please use the following settings on your Satellite Decoder/ Receiver:

Galaxy 19 Satellite
Transponder: 20

Downlink Frequency: 12060 MHz

Symbol Rate: 22000 MS/s

FEC: 3/4

Polarisation: Horizontal

How to watch  ITVN on your DSTV receiver

*Does not include PVR Decoders.

Press MENU on your remote

Use your DOWN ARROW key and scroll to ADVANCED OPTIONS, then press OK

On DISH INSTALLATION press OK

Press in the Pin Code 9949 then press OK

HOME NETWORK NETWORK 2 NETWORK 3

On HOME NETWORK press OK

Then go LNB HI FREQUENCY it will be set on 10700 so you must change it to 10600

Scroll down and select ACCEPT ALL DISPLAYED VALUES AND LEAVE SCREEN press OK

Under HOME NETWORK press OK, and use your right arrow key to select OTHER then press OK

Under HOME NETWORK make sure the following parameters are punched in:

Satellite Name: IS20

LNB Power is: ON

LNB MODE: Dual frequency

LNB LO Frequency: 9750

LNB HI Frequency: 10600

Frequency: 11594

Symbol Rate: 27500

FEC: 5/6

Polarization: Vertical

Use NIT: Yes

Move down to ACCEPT ALL DISPLAYED VALUES AND LEAVE SCREEN, then press OK

On Network 2 press OK, and use your right arrow key to select OTHER, then press OK

Under Network 2 make sure the following parameters are punched in:

Satellite Name: IS20

LNB Power is: ON

LNB MODE: Dual frequency

LNB LO Frequency: 9750

LNB HI Frequency: 10600

Frequency: 12682

Symbol Rate: 26652

FEC: 1/2

Polarization: Horizontal

Use NIT: Yes 

 
Move down to ACCEPT ALL DISPLAYED VALUES AND LEAVE SCREEN, then press OK

On Network 3 press OK, and use your right arrow key to select OTHER, then press OK

Under Network 3 make sure the following parameters are punched in:

Satellite Name: IS20

LNB Power is: ON

LNB MODE: Dual frequency

LNB LO Frequency: 9750

LNB HI Frequency: 10600

Frequency: 12722

Symbol Rate: 26675

FEC: 5/6

Polarization: Vertical

Use NIT: Yes

Move down to ACCEPT ALL DISPLAYED VALUES AND LEAVE SCREEN, then press OK

 

Move down to Scan All Networks, then press OK

After a successful scan - ITVN will be found under Public Channels

 

 

 

 

How to tune in  ITVN on your ELSAT receiver

    1. On your remote control, press the MENU button.
    2. Press the OK button to select Installation.
    3. Press the down arrow button twice and then OK to select Dish Install Menu.
    4. Make sure that the first (top) button reads Panamsat 7, 68.5 E.


(Follow steps 5-6 only if the first button does not read the satellite mentioned above).

    1. Press the up arrow button and then OK the first button.
    2. Scroll through the menu until you find Panamsat 7, 68.5 E, then press OK.
    3. Select the second (bottom) button and press OK.
    4. Scroll through the menu until you find 12722 / 26657 / H, then press OK

(If you hear a sudden loud noise, don't worry. Just reduce the volume level on your TV).

    1. Press the green button to scan your network.
    2. Press the left arrow button to select yes, then press OK

(This step might take a while).

  1. Press the EXIT button until you reach the main screen.
  2. Press the OK button to view the Channel Menu.
  3. Scroll through the menu and search for Christian channels
next
prev

ITVN

Satellite Tune in Settings