Tune In
Watch ITVN on Satellite with these settings.
- Home
- Tune In
Old Decoders
- Press Menu
- Press OK two times, to check if your network is ok
- The Network Strength must be 100% and not less and Network Quality over 75%
- When all is ok - press exit on your remote control
- Scroll to ADVANCED Settings – Press OK
- Select Network 5 – Press OK
- Change it to DSTV IS20 - Press OK
- Scroll to Frequency - enter 12562 – Press OK
- Scroll to Symbol Rate – enter 30000 – Press OK
- Scroll to FEC - select 5/6
- Polarisation - Horizontal
- Scroll down to row 11
- Accept All Networks – Press OK
- Scroll down to row 9 and Scan All Networks
- When all the scanning is done, Press the TV button
- Scroll to Public operator IS bouquet and press OK
- Then you can enjoy ITVN on the following channels 15, 18 or 22, 24 or 27
HD Decoders or Explora
- Press the blue DSTV button(Menu)
- Select the settings option by scrolling with left arrow key
- Under settings, go to the last item "Satellite Settings"
- Then go to "Additional Networks" and press ok
- Select Network 5, change the settings as listed below: - "Enable Network" from NO to YES
- Use NIT from YES to NO then
- Frequency 12562
- Symbol rate 30000
- FEC 5/6
- Polarization Horizontal
- When done, press ok and save settings,
- Then go to Scan and press ok